Jan 31, 2018 - VCDS Lite - Port Status Ok, Interface Not Found VAG-COM & Diagnostics. Chungking express torrent 1080p. How to solve VCDS 12.10.3 interface: not found error Today china.

You need to go into device manager and hunt for the lead and then look at the settings. One of the settings will have the port number.

In the start-up screen for VCDS, the is a test setting of some sort - I forget now - go to the test, and ensure the com port in use is the same as the one in your device manager. Then save the test BEFORE you get excited try and reprogram the toilet flush module. I'm assuming your using VCDS lite with the e-bay lead, which does have limited functionality.

If you are using a pirate copy, this is norty and frowned on here. The e-bay leads are a bit of an ****, so you may end up wanting to speak to NHM if it all gets too much, as he will swap you a full CAN lead for the requisite number of beer tokens.

I think you can still get a KII lead from Ross-Tech in the States, but TBH, the money saved is not really worth it. (I did that though).

• Uncompress the file. Double-click on 'Install.exe' to install the drivers.

• Plug cable into any computer's USB port. • 'Found New Hardware Wizard' will start and it will ask you 'Can Windows connect to Windows Update to search for the software?' Select 'Yes'. • Select 'Install the software automatically'. • After the installation is complete, click 'Finish'. • 'Found New Hardware Wizard' will start once again because there are two drivers for this cable. • Go through the same steps as explained above to install this second driver.

If install is successful, move onto Step 2. If installation fails, see below: Troubleshooting: If Drivers Failed To Install. Installation failed?.

Unextract the file into any folder. Then while your cable is connected to the computer — go Device Manager.

• Windows Vista/7/8/10: Control Panel » System » Device Manager • Windows XP: Control Panel » System » 'Hardware' tab » Device Manager You'll see a device similar to 'USB Serial Port' under either 'Other devices' or 'Ports (COM & LPT)'. Right-click and choose 'Update Driver Software'. Like this: Then select the location where you unextracted Driver Pack 2. Let it install. STEP 2: Discover Port Number that VAG-COM KKL Cable is Using Go to Control Panel. • Windows Vista/7/8/10: Control Panel » System » Device Manager • Windows XP: Control Panel » System » 'Hardware' tab » Device Manager Expand 'Other devices' or 'Ports (COM & LPT)'. Whichever contains 'USB Serial Port'.

Next to 'USB Serial Port' — you'll see a number. If the COM port number is between 1-4, then everything is fine. Move onto Step 3.

If the COM port number is above 4, then we'll have to change it so it's between 1-4. Right-click on 'USB Serial Port' and click on 'Properties' — as per below pic: Then: • Click: Port Settings • Click: Advanced • For 'COM Port Number' — you MUST choose any number between 1-4. Now let's test if everything is working. Move onto next step below. STEP 3: Test Everything is Working Cable should be plugged into computer. • Start VCDS-Lite software.

• Click 'Options' button. • You will see 'Select COM Port' box. Select the 'COM Port' number as explained in Step 2. • Click the ‘Test’ button. • If everything is good, it should display 'Interface Status: Found!' • You can now connect other end of cable to car.